If you are looking for CF RS232/422/485 Cards too please click here !
SL232 => 1 x RS232 - ruggedized !
 The SL232 offers a convenient way to add a single RS232 asynchronous serial port to your laptop, PDA, or desktop (using one of Elan's Desktop PCMCIA adapters). The card automatically configures to become another COM port using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment. For more information about Linux support please click here !
Also available with robust direct cable termination instead of Type45 cable, product code SL232R - MOQ may apply.
Technical Features:
16C550 UART with 16-byte TX and RX FIFOs for high speed and reliable communications.
Hardware switchable baud rate multiplier allows either industry standard rates up to 115KBaud in x1 mode or up to 921Kbaud in x8 mode...no special drivers needed so faster rates work in CE & PocketPC too.
Supports 5/6/7/8 data bits, odd/even/no parity, 1/1.5/2 stop bits, baud rates including 2400, 4800, 9600, 19200, 57600, 115200 in x1 mode, and 8 times these rates in x8 mode i.e. up to 921600 baud.
Supported by standard drivers in DOS*, Windows95, 98, 98SE, Me, NT4, 2000, XP, CE, PocketPC & Linux => Latest Driver Support !
For more information about Linux support please click here !
Card comes with Elan's Card Center Pro software that installs INF scripts and sample code Automatic O.S. recognition and configuration.
Hot swappable PCMCIA 2.1+ compliant TypeII design.
Low power consumption: Typical 20mA at 5V, with support for reduced power sleep mode (depends on O.S.).
Will also work at 3.3V with true RS232 levels for hosts that cannot supply 5V.
Power consumption drops automatically when terminal equipment is not connected i.e. unplugging cable at either end.
Card has 5V output to power external equipment (custom cable required, consult Elan sales for more information).
15KVolt ESD protected RS232 drivers and receivers for protection of your card and PC.
Supplied with 300mm Type45 cable. Connector latches into PC Card for security. DB9 Male with female screwlocks and industry standard RS232 pinout for direct attachment of terminal equipment.
5V Output Option: 5V output on Pin 24/25 with optional Type40 cable. Can be used to power external equipment. Please asked for price and availability.
Can be fitted with Elan's unique Strain Relief Assembly to ruggedize the PC Card to cable connection (included in the standard delivery package), product code "SRA1".
Also available with robust direct cable termination instead of Type45 cable, product code SL232R - MOQ may apply.
*DOS support requires Card and Socket services, e.g. CardWare from APSoft see http://www.tssc.de
_________________________________________________________________
IC232 => 1 x RS232 opto-isolated - ruggedized !
 The IC232 is a unique way to add a single RS232 opto-isolated asynchronous serial port to your laptop, PDA, or desktop (using one of Elan's Desktop PCMCIA adapters). Using an optically isolated port means that there is no direct galvanic connection between your computer and the terminal equipment you are plugged in to. This means no possibility of ground loops or hazardous potentials that could occur with non isolated cards. For more information about Linux support please click here !
The card automatically configures to become another COM port by using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment.
Technical Features:
16C550 UART with 16-byte TX and RX FIFOs for high speed and reliable communications up to 115KBaud.
RS232 port has full galvanic isolation from PC Card slot with isolation to 75V ac rms.
Supported by standard drivers in DOS*, Windows95, 98, 98SE, Me, NT4, 2000, XP, Ce, PocketPC & Linux => Latest Driver Support !
For more information about Linux support please click here !
Card comes with Elan's Card Center Pro software that installs INF scripts and sample code Automatic O.S. recognition and configuration.
Hot swappable PCMCIA 2.1+ compliant TypeII design Low power consumption: Typical 165mA at 5V, automatically reduces to 100mA when comms cable is disconnected.
15KVolt ESD protected RS232 drivers and receivers for protection of your card and PC.
Supplied with 300mm Type45 cable. Connector latches into PC Card for security. DB9 Male with female screwlocks and industry standard RS232 pinout for direct attachment of terminal equipment.
Can be fitted with Elan's unique Strain Relief Assembly to ruggedize the PC Card to cable connection (included in the standard delivery package), product code "SRA1".
Also available with robust direct cable termination instead of Type45 cable, product code IC232R. MOQ may apply.
*DOS support requires Card and Socket services, e.g. CardWare from APSoft see http://www.tssc.de
_________________________________________________________________
SL332 => 2 x RS232 - ruggedized !
 The SL332 offers a convenient way to add two RS232 asynchronous serial ports to your laptop, PDA, or desktop (using one of Elan's Desktop PCMCIA adapters).
The card automatically configures to become two more COM ports by using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment. Windows XP hotfix information!
For more information about Linux support please click here !
Technical Features:
Dual 16C550 UARTs with 16-byte TX and RX FIFOs for high speed and reliable communications.
Hardware switchable baud rate multiplier allows either industry standard rates up to 115KBaud in x1 mode or up to 921Kbaud in x8 mode...no special drivers needed for faster rates. Each port can be configured separately.
Supports 5/6/7/8 data bits, odd/even/no parity, 1/1.5/2 stop bits, baud rates including 2400, 4800, 9600, 19200, 57600, 115200 in x1 mode, and 8 times these rates in x8 mode i.e. up to 921600 baud.
Supported by standard drivers in Windows95, 98, 98SE, Me, 2000, XP => Latest Driver Support !
For more information about Linux support please click here !
Card comes with Elan's Card Center Pro software that installs INF scripts and sample code. Automatic O.S. recognition and configuration.
Hot swappable PC Card 5.0 compliant true multi-function TypeII design.
Low power consumption: Typical 40mA at 5V, with support for reduced power sleep mode (depends on O.S.).
Will also work at 3.3V with true RS232 levels for hosts that cannot supply 5V.
Power consumption drops automatically when terminal equipment is not connected i.e. unplugging cable at either end.
Card has 5V output to power external equipment (custom cable required, consult Elan sales for more information).
15KVolt ESD protected RS232 drivers and receivers for protection of your card and PC Supplied with 300mm Type47 cable.
Connector latches into PC Card for security. Dual DB9 Males with female screwlocks and industry standard RS232 pinout for direct attachment of terminal equipment.
Can be fitted with Elan's unique Strain Relief Assembly to ruggedize the PC Card to cable connection (included in the standard delivery package), product code "SRA1".
Also available with robust direct cable termination instead of Type45 cable, product code IC232R. MOQ may apply.
_________________________________________________________________
QSP100 - 4 x RS232
 The QSP-100 is a PCMCIA card which adds four fully independent RS-232 serial ports to the system. It can be used in any laptop or notebook computer with a Type II PCMCIA drive, or in a desktop computer equipped with a compatible PCMCIA drive.
The QSP-100 utilises 16550 UARTs that contain 16 byte transmit and receive FIFOs for increased performance in multi-tasking environments, and with applications involving high data rates. Each of these UARTs requires eight bytes of I/O space when enabled, thus the QSP-100 must be located on an even 32 byte (20H) boundary and users may select on which I/O address space the card will be located (e.g. 300H, 320H, 240H, etc). The four serial ports on the QSP-100 can share a single interrupt using an interrupt status register to indicate which of the four ports triggered the interrupt. This interrupt status register is implemented on the UARTs seldom used "ScratchPad" register. If an application requires use of the UART's ScratchPad registers, the interrupt status register can be easily disabled.
Technical Features:
Baud rate: 115.2kbps max
Bus interface: PCMCIA Card Standard 2.1
UART: 16550
Power requirement: 5Vdc @ 26 mA typical, 34 mA max
PCMCIA connector: Standard 33 pin 0.8 mm shielded connector
Handshaking: Full RS232 specification on all channels
OS support: Windows 95, 98, ME, NT, 2000, XP, CE & DOS
_________________________________________________________________
SL385 => 2 x RS232/RS422/RS485 - ruggedized !
 The SL385 is a unique dual port multi-standard asynchronous serial card for your laptop, PDA, or desktop (using one of Elan's Desktop PCMCIA adapters). For convenience and flexibility, the SL385 can have each port set individually to RS232 or to RS422/RS485 mode.
Further configurations allow full and half duplex operation, and a choice of RS485 half duplex transmitter enable modes.
The card automatically configures to become two more COM ports by using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment. Windows XP hotfix information!
For more information about Linux support please click here !
Technical Features:
Dual 16C550 UARTs with 16-byte TX and RX FIFOs for high speed and reliable communications.
Switchable RS232 or RS422/RS485 mode on each channel
Switchable full or half duplex RS485 mode per channel with in-card connection of TX and RX signals in half duplex mode.
RS422 mode includes differential RTS and CTS modem control signals and permanently enabled TX driver and receiver
Switchable per channel between auto TX enable and RTS override TX enable when in RS485 half duplex mode.
Switchable local TX character echoing when in RS485 half duplex mode (setting common to both ports).
Hardware switchable baud rate multiplier allows either industry standard rates up to 115KBaud in x1 mode or up to 921Kbaud in x8 mode...no special drivers needed for faster rates (setting common to both ports).
Full fail-safe open/short circuitry on RS485 inputs.
Supports 5/6/7/8 data bits, odd/even/no parity, 1/1.5/2 stop bits, baud rates including 2400, 4800, 9600, 19200, 57600, 115200 in x1 mode, and 8 times these rates in x8 mode i.e. up to 921600 baud.
Supported by standard drivers in Windows95, 98, 98SE, Me, 2000, XP => Latest Driver Support !
For more information about Linux support please click here !
Card comes with Elan's Card Center Pro software that installs INF scripts and sample code Automatic O.S. recognition and configuration.
Hot swappable PC Card 5.0 compliant true multi-function TypeII design.
Low power consumption: Typical 55mA at 5V, with support for reduced power sleep mode (depends on O.S.).
Will also work at 3.3V with true RS232/422/485 levels for hosts that cannot supply 5V.
ESD protected drivers and receivers for protection of your card and PC.
Attention !
Differing from the picture the SL385 is supplied with a 300mm long "Dual DB25" Type48 cable equiped with two 25 pin connectors and not with two 9 pin connectors shown on the picture !
Connector latches into PC Card for security. Dual DB25 Males with female screwlocks and industry standard pinout for direct attachment of terminal equipment.
Can be fitted with Elan's unique Strain Relief Assembly to ruggedize the PC Card to cable connection (included in the standard delivery package), product code "SRA1".
Also available with robust direct cable termination instead of Type48 cable, product code SL385R. MOQ may apply.
_________________________________________________________________
SP230 => 1 x RS232 + 1 x LPT - ruggedized !
 The SP230 is an ideal card for "legacy free" notebooks and sub-notebooks that don't have any D-Type connector interfaces. It adds a single RS232 asynchronous serial port and a Centronics/EPP parallel port to your laptop or desktop (using one of Elan's Desktop PCMCIA adapters). For more information about Linux support please click here !
The card automatically configures to become a COM port and an LPT port by using the built-in O.S. drivers that are tried and tested and are optimized to work in the Windows environment.
Technical Features:
16C550 UART with 16-byte TX and RX FIFOs for high speed and reliable communications.
Hardware switchable baud rate multiplier allows either industry standard rates up to 115KBaud in x1 mode or up to 921Kbaud in x8 mode...no special drivers needed so faster rates work in Ce & PocketPC too.
Centronics/EPP parallel port with ESD protected interface signals. Parallel port modes available are SPP Unidirectional (Centronics), SPP Bidirectional and EPP 1.9.
Supports 5/6/7/8 data bits, odd/even/no parity, 1/1.5/2 stop bits, baud rates including 2400, 4800, 9600, 19200, 57600, 115200 in x1 mode, and 8 times these rates in x8 mode i.e. up to 921600 baud.
Supported by standard drivers in Windows95, 98, 98SE, Me, 2000, XP => Latest Driver Support !
For more information about Linux support please click here !
Card comes with Elan's Card Center Pro software that installs INF scripts and sample code Automatic O.S. recognition and configuration.
Hot swappable PC Card 5.0 compliant true multi-function TypeII design.
Low power consumption: Typical 35mA at 5V. Power consumption drops automatically when terminal equipment is not connected to RS232 port i.e. unplugging cable at either end.
15KVolt ESD protected RS232 drivers and receivers for protection of your card and PC.
Supplied with 300mm Type313 cable. Connector latches into PC Card for security. DB9 Male with female screwlocks and industry standard RS232 pinout plus DB25 Female with female screwlocks for direct attachment of terminal equipment.
Can be fitted with Elan's unique Strain Relief Assembly to ruggedize the PC Card to cable connection (included in the standard delivery package), product code "SRA1".
| 
